GJQ (X) -KG clamp flexible rubber joints I. Overview GJQ (X) -KG clamp flexible rubber joints with clamp to replace the flange and bolts, using easily clamp rubber Two nozzle fitting suits were on the side you want to take the pipeline through the rubber joints and pipe clamp fixed connection; loosen the clamp to the demolition. So as to achieve the purpose of the displacement amount of compensation due to thermal expansion and contraction pipes, water produced. Compared with the general rubber joints, has the following characteristics: 1, clamp rubber head flange and bolts saving, saving the costs of the project. 2. Clamp the mouth does not require rubber head tube flange to simplify the production process of rubber joints, saving raw materials. 3, clamp rubber connector simplifies installation and maintenance work, improve work efficiency. 4, clamp made of stainless steel, corrosion resistant characteristics, the path from DN50-400, pressure rating from 0.25mpa-1.0mpa. GJQ (X) -KG clamp flexible rubber joints technical parameters nominal diameter DN installation length L axially elongated radial displacement of the axial compression deflection angle (a1 + a2) ° 50mm 180 7 10 10 15 ° 65 mm 180 7 13 11 15 ° 80 mm 180 8 15 12 15 ° 100 mm 180 10 19 13 15 ° 125 mm 180 12 19 13 15 ° 150 mm 180 12 20 14 15 ° 200 mm 200 16 25 22 15 ° 250 mm 200 16 25 22 15 ° 300 mm 200 16 25 22 15 ° 350 mm 200 16 25 22 15 ° 400 mm 200 16 25 22 15 ° 450 mm 200 16 25 22 15 ° 500 mm 200 16 25 22 15 ° 600 mm 200 16 25 22 15 ° 700 mm 200 16 25 22 20 ° 800 mm 200 16 25 22 20 ° 900 mm 200 16 25 22 20 ° 1000 mm 200 18 25 22 20 ° 1200 mm 200 18 25 24 20 ° 1400 mm 200 20 26 24 20 ° 1600 mm 200 25 35 26 20 ° 1800 mm 200 20 26 26 20 ° 2000 mm 200 20 26 26 20 °